Search found 94 matches

by abhimanyu
Mon Oct 14, 2013 5:58 am
Forum: Arduino
Topic: ardupilot
Replies: 3
Views: 2786

Re: ardupilot

You can try removing all instances of Mission Planner and any drivers that were installed with it.
Download the latest Mission Planner software from 3D Robotics here.

And follow the exact instructions from here: http://code.google.com/p/ardupilot-mega ... stallation. (This is an old guide).
by abhimanyu
Mon Oct 14, 2013 5:25 am
Forum: Arduino
Topic: pins of ioio otg
Replies: 1
Views: 2141

Re: pins of ioio otg

Some of the Digital I/O Pins can function as UART.

Please find more details here at: IOIO-OTG's GitHub Page
And, the UART specific Page is here.
by abhimanyu
Mon Oct 14, 2013 5:21 am
Forum: Arduino
Topic: slow burning of program in arduino smd version
Replies: 1
Views: 1850

Re: slow burning of program in arduino smd version

You may remove all your drivers and COM Ports associated with your Arduino board and start fresh. Are there multiple USB devices connected at the same time? Also, you can try holding down the reset button while uploading your code. As soon as the status in the Arduino IDE changes from Compiling... t...
by abhimanyu
Mon Oct 14, 2013 5:18 am
Forum: Arduino
Topic: Arduino support Active nfc communication ...
Replies: 1
Views: 1978

Re: Arduino support Active nfc communication ...

The product that you mentioned: Adafruit PN532 NFC/RFID Controller Shield for Arduino has a great resource for learning which can be found here: Adafruit Learning System.

The Arduino library which supports this module is given here: Adafruit's GitHub Page
by abhimanyu
Mon Oct 14, 2013 5:08 am
Forum: Wireless
Topic: xbee explorer regulated
Replies: 1
Views: 2274

Re: xbee explorer regulated

The product that you mentioned is a Regulator Board for xBee modules. It acts as a Breakout for xBee modules (xBee has a pin pitch of 2mm, which is not common). It breaks out these pins in standard 2.54mm spacing (0.1" BreadBoard friendly). Also, it has a LDO voltage regulator to step down the ...
by abhimanyu
Tue Aug 06, 2013 7:00 pm
Forum: Arduino
Topic: Arduino UNO R3 not detected by usb cable
Replies: 8
Views: 7882

Re: Arduino UNO R3 not detected by usb cable

Can you elaborate your problem?
Were you able to work with your device before the problem started?
by abhimanyu
Sat Jun 22, 2013 7:33 am
Forum: Arduino
Topic: Problem with doing some analog projects
Replies: 3
Views: 2477

Re: Problem with doing some analog projects

This Trim Pot is also called a Potentiometer.
It can act as a variable resistor.
by abhimanyu
Fri Jun 21, 2013 5:18 pm
Forum: Arduino
Topic: Problem with doing some analog projects
Replies: 3
Views: 2477

Re: Problem with doing some analog projects

You must have received a TrimPot - 1K or 10K value.
Check the packing list for this part.
by abhimanyu
Sat Jun 01, 2013 9:19 am
Forum: Sensors
Topic: ADJD-S311-CR999 color light sensor
Replies: 1
Views: 2723

Re: ADJD-S311-CR999 color light sensor

You may read this tutorial from bildr here for the Color Light Sensor Board. It will give you a basic idea of how to set up your Color Sensor with Arduino's Code. Also, all the necessary components required for the sensor board to work are already populated on the board. Next, you will need to confi...
by abhimanyu
Mon May 20, 2013 6:54 am
Forum: Code
Topic: Magnetometer
Replies: 3
Views: 16782

Re: Magnetometer

See this link: HMC5883L.cpp from Jeff's GitHub Line 257: // DATA* registers /** Get 3-axis heading measurements. * In the event the ADC reading overflows or underflows for the given channel, * or if there is a math overflow during the bias measurement, this data * register will contain the value -40...

Go to advanced search